background image

3

F

OR PROPER AND SAFE USE

DANGER

NP-200 Lithium-ion batteries

The DiMAGE Xi operates on a small, but powerful lithium-ion battery. Misuse or abuse of the lithium-
ion battery can cause damage or injury through fire, electric shock, or chemical leakage.

Read and understand all warnings before using the battery.

• Do not short, disassemble, damage, or modify the battery.
• Do not expose the battery to fire or high temperatures over 60°C (140°F).
• Do not expose the battery to water, or moisture. Water can corrode or damage the internal battery

safety devices and cause the battery to overheat, ignite, rupture, or leak.

• Do not drop or subject the battery to strong impacts. Impacts can damage the internal battery safe-

ty devices and cause the battery to overheat, ignite, rupture, or leak.

• Do not store the battery near or in metallic products.
• Do not use the battery with any other products.
• Only use the specified charger within the voltage range specified on the charger unit. An inappropri-

ate charger or current may cause damage or injury through fire or electric shock.

• Do not use a leaking battery. If fluid from the battery enters your eye, immediately rinse the eye with

plenty of fresh water and contact a doctor. If fluid from the battery makes contact with your skin or
clothing, wash the area thoroughly with water.

• Only use or charge the battery in an environment with ambient temperatures between 0° and 40°C

(32° and 104°F). Only store the battery in an environment with ambient temperatures between –20°
and 30°C (–4° and 86°F) and a humidity of 45% to 85% RH.

Summary of Contents for Dimage Dimage Xi

































































































Reviews: