background image

Settings made with the auto-recording menu will
remain in effect until changed or the camera is
reset to its default settings (p. 90).

Image size - To set the pixel resolution of the
images. Image size affects the size of the image
file.

Image quality - To set the rate of compression of
the images. Image quality affects the size of the
image file.

Voice memo - To record audio after a still image
has been captured. The function can be turned off
and the length of the recording can be set.

Date imprint - The date of recording can be
imprinted on each image. The date is set in the
custom 2 section of the setup menu (p. 20).

Digital zoom - The digital zoom can be turned on
or off.

Instant playback - After taking a picture, the image will be displayed on the monitor for
two or ten seconds. The displayed image can be deleted before being saved to the
CompactFlash card.

Read the following sections for more details on these options and settings. All of these
functions appear on the multi-function recording mode menu (p. 54).

42

43

A

UTO

-

RECORDING MODE

ADVANCED OPERATION

NAVIGATING THE AUTO-RECORDING MODE MENU

In auto-recording mode, press the menu button (1) to activate the menu. The menu
button also turns off the menu after settings are made. The four-way keys of the controller
(2) are used to move the cursor in the menu. Pressing the center of the controller will
enter a setting.

Use the up/down keys of the controller to scroll through the menu options. Highlight
the option whose setting needs to be changed. When scrolling in one direction, the
cursor will jump between the top and bottom of the menu.

With the menu option to be changed highlighted, press the right controller key; the
settings will be displayed with the current setting highlighted. To return to the menu
options, press the left key.

Once a setting has been
selected, the cursor will return to
the menu options and the new
setting will be displayed.
Changes can continue to be
made. To return to the auto-
recording mode, press the
menu button.

Changes made on the auto-
recording mode menu will also
affect the

multi-function

recording mode. 

Auto

Basic

Image size

Quality

Voice memo

Date imprint

Digital zoom

2272 X1704

Standard

Off

Off

Off

Inst.Playback

Off

Use the up/down keys to highlight
the new setting.

2272 X 1704

1600 X 1200

1280 X 960

640 X 480

Fine

Standard

Economy

On

On

Image size

Quality

Date imprinting

Digital zoom

Basic

15 sec.

Voice memo

5 sec.

Off

Off

Off

10 sec.

Inst.Playback

2 sec.

Off

Press the center of the controller
to select the highlighted setting.

2

1

TIFF

AUTO-RECORDING MODE -

ADVANCED
OPERATION

Summary of Contents for DiMAGE S414




























































Reviews: