33
Adjust the sliders or enter values between ±2 in 0.1 increments
in the text boxes. Press the apply button (1) to view the effect on
the preview image and the histograms. Repeat until the desired
result is achieved. To cancel all settings, click the reset button
and press the apply button to initialize the preview image.
When using autoexposure, adjustments are made in reference
to the exposure determined by the AE system. To calibrate the
scanner in reference to a standard exposure, turn the autoexpo-
sure functions off in the preference window (p. 30); set exposure
control for negatives to manual or uncheck the auto-expose-for-
slides check box. This is recommended when making settings
for specific films.
Saving exposure settings
Loading exposure settings
Click the apply-all button to use the exposure-control settings for
all the images in the film holder. To cancel changes to exposure
once the apply-all function has been used, click the reset button
and then click the apply-all button again.
Click the save setting button to open the
save window.
Enter the name for the setting file. Click OK.
Click the load setting button to open the load window.
1
Click on the file name to highlight it. Click OK to apply
the settings to the image displayed in the exposure-con-
trol tab. Confirm the autoexposure settings in the prefer-
ences window (p. 30).
To delete a setting file, open the load window and click
on the file name to highlight it. Use the keyboard delete
key to erase the file.
