4
Initial Steps . . .
4-4
Rev. /
Books and Bound Originals
1
Lift the Original Cover.
Originals are not automatically detected at a cover angle of less
than 15°.
2
Place the book on the Original
Glass with the side to be copied
face down.
3
Align the rear left-hand corner of the
book with the arrow mark. Press the
rear edge of the original against the
Original Positioning Plate.
?
Have you selected the
"Separation" function under
Orig. > Copy type to make book
copies?
Ü
Center the book on the book
mark on the Length Scale. The
copies will be made in the
correct order.
4
Close the Original Cover.
?
Is the book too thick to close the Original Cover?
Ü
Leave the Original Cover open.
Ü
To avoid being dazzled by the extremely bright light, do not look at
the Original Glass during the copy process.
CAUTION
Improper use can damage the Original Glass
Books weighing more than 3 kg or pressing the book firmly can damage
the Original Glass.
Ü
Place only books weighing less than 3 kg onto the Original Glass.
Ü
Do not press an open book onto the Original Glass.
Length Scale