4
Initial Steps . . .
4-16
Rev. /
5
Carefully remove the seal to ensure
that no toner escapes from the
bottle.
6
Push the new Toner Bottle into its
holder so that the arrow on the
bottle is facing you.
7
Align the mark on the bottle with the
mark on the holder and swing the
holder back until it snaps into
position.
8
Close the Front Door.
.
Copies still too light?
If your copies are still too light after changing the Toner Bottle, activate
the “Toner Replenisher“ function.
(See “Activating Auxiliary Toner Replenisher Mode” on page 6-6.)
