Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-24
1149SBS050403A
3. System Input
D
This function allows the Tech. Rep. to change the fixed zoom ratios, set the paper size, define the mar-
keting area, configure for the Key Counter, and input the telephone number.
Tech. Rep. Mode
"
System Input
Touch Panel Display
Operation
Change Fixed Zoom
Ratio
Change a fixed zoom ratio to a desired value in the range between X0.500
and X2.000.
<Procedure>
1. Select the fixed zoom ratio to be changed and clear the setting by pressing
the Clear key.
Note: If a ratio is mistakenly cleared, pressing the Panel Reset key will
recover the ratio.
2. Enter the new zoom ratio from the 10-Key Pad.
3. Touch “Enter” to validate the new setting.
Paper Size Input
Set the size of the paper used in each paper source.
<Procedure>
1. Select the paper source for which the paper size is to be set (on the Paper
Size Input 1/2 screen).
2. Then, the Paper Size Input 2/2 screen appears. Using the
Y
or
B
key,
select the paper size.
3. Touch “Enter” to validate the paper size setting.
Marketing Area
Select the marketing area to set the paper size and fixed zoom ratios.
MJ
MC
MH
Other Areas
Note: Be sure to initialize the copier after the marketing area has been
selected.
Key Counter
Select whether or not to inhibit copying if a Key Counter is not inserted
when the copier is equipped with a Key Counter.
Note: Be sure to select “ON” when the copier is equipped with a Key
Counter.
ON
Inhibits copying if the Key Counter is not inserted.
Permits copying even if the Key Counter is not inserted.
OFF
Telephone # Input
Input the telephone number that will appear on the Touch Panel when a
malfunction occurs in the copier.
<Procedure>
1. Enter the phone number (consisting of up to 19 digits) from the 10-Key
Pad.
Note: Use the Interrupt key to enter a hyphen “–.”
2. Touch “OK” to validate the phone number setting.