Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-37
1156SBS050409A
9. Accessory Test
D
This function is used to make an operation check and adjustments to the ADF and Sorter or Staple Sort-
er.
Tech. Rep. Mode
"
Accessory Test
Touch Panel
Display
Setting (The default is
.)
Highlighted
ADF Check
Enables the operation check and adjustments to be performed for the
document feeder.
Paper Passage & Input
Check
Makes a paper passage test in each operating mode of the ADF and
checks the sensors along the paper path for operation.
2in1
2-Sided
Step Feed
SADF
Normal
Empty Sensor
ADF Entrance Sensor
Register Sensor
Exit Sensor
Auto Feeder Empty Sensor
Width Sensor A
Width Sensor B
Width Sensor C
Exit Drawer Sensor
Orig. Guide Home Sensor
Note: “1” – paper present; “0” – paper not present
<Procedure>
1. Select the operating mode to be checked and touch “Next.”
2. Load the required number of originals into the Document Feed Tray
and press the Start key.
Output Check
Checks each of the motors and solenoids for operation.
M1
M2
M3
M4
M5
SL1
SL2
SL3
SL4
CL
<Procedure>
D
Select the part to be checked and press the Start key.
Doc. Stop Position Set
Adjusts the document stop position in different operating modes of the
ADF.
Setting
43
50
58
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
1-Sided
2-Sided
2 in 1
2in1 Space in between origs.
Auto Feeder
Regist Loop
Stop
Position
–7mm
0mm
+8mm
. . . . . . . . . . .
. . . . . . . . . . . . .
Note: A greater setting value (+ direction) moves away from the Origi-
nal Width Scale. (In “2in1 Space between origs.,” it is for greater
distance between the documents.)
<Procedure>
1. Select the operating mode to be checked and load the required number
of originals into the Document Feed Tray.
2. Press the Start key. When the original is taken up and then stopped,
raise the ADF and adjust the stop position using the
A
or
"
key; then,
feed the original once again for a recheck.