Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-40
1156SBS050411A
11. Machine Status
D
This function shows the codes of isolated malfunctions which are currently present. This screen is also
accessible by touching the wrench mark shown at the bottom left corner of the Basic screen under nor-
mal operating conditions.
Tech. Rep. Mode
"
Machine Status
Touch Panel
Display
Setting
Machine Status
Of the malfunction codes listed below, those that have occurred are dis-
played, together with the functions that are disabled by these malfunctions.
Up to five isolated malfunctions are shown. When a sixth isolated malfunction
occurs, the copier considers it as an ordinary malfunction. Even if there are
less than five isolated malfunctions, if there are isolated malfunctions occur-
ring at all paper sources, the next isolated malfunction will be regarded as an
ordinary one.
Malfunction Code
Description
C09XX
Paper take-up failure
C0dXX
Duplex Unit malfunction
C0350 to 52
SP communication failure
C0F2X
Faulty AIDC Sensor
C0FEX to FX
Faulty Original Size Detecting
Sensor
C004d/45
Cooling Fan Motor malfunc-
tion (Ventilation/Fusing
Section)
C0b3X / 5X to 7X
Sorter malfunction
C0F7X
Faulty Paper Empty Sensor
<Clearing Procedure>
With the Machine Status screen on the Touch Panel, swing open and close the
Front Door to clear all the isolated malfunctions.
1149SBS050412A
12. Admin. Mode
D
This function is used to enter or change the administrator number, in addition to the functions set in the
“Administrator Mode” available from User’s Choice.
Tech. Rep. Mode
"
Admin. Mode
Touch Panel
Display
Setting
Copy Track
Copy Track Data
Max. Copy Sets
See “Administrator Mode” of User’s Choice.
User Help
Administrator #
Input
From the 10-Key Pad, enter a 4-digit number (0000 to 9999) that serves as an
ID number for opening the “Admin. Mode” of User’s Choice.
