Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-42
1156SBS0603A
6-3. Factory Setting Function Tree
Factory
Setting
Adjust
Function
Marketing
Area
A0
Lens Focus
A1
Lens Full Size Position
A2
Mirror Full Size Position
A3
Feed Direction Mag. Ratio
A4
Scan Regist Full Size
A5
Scan Regist Reduction
Adjust 1/2
A6
Book B-Scan Regist
A11
Scan Regist Enlargement
A12
Leading Edge Erase Adjust
A13
Trailing Edge Erase Adjust
Adjust 1/2
* See “Tech. Rep. Mode” for functions other than
F2, F4, F6, F8, and FF.
* See “Tech. Rep. Mode.”
F1
Paper Passage
F3
Exp. Lamp
F5
Optimum & AE
F7
Orig. Sensor
Developer
Paper Path Sensors
F2
Drum/Trans
F4
HV Separator
F6
Edit Ref. Adj
F8
ATDC Adjust
FF
F8+F5
1156SBS060301A
1. Function
Factory Setting
"
Function
Touch Panel
Display
Operation
F2
Drum/Trans
Checks the PC Drum Charge Corona and Image Transfer Corona for output.
Note: For factory adjustment only.
F4
HV Separator
Checks the Paper Separator Corona for output.
Note: For factory adjustment only.
F6
Edit Ref. Adj
Pressing the Start key turns ON and OFF the Image Erase Lamp to make a
checkered pattern on the paper for checking the lamp for correct operation
and adjusting its position.