Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-44
1156SBS060302A
2. Adjust
D
This function is used to adjust the optical system before shipment from the factory and must not be run
except when the RAM Board has been replaced with a new one or memory cleared. Further, when the
RAM Board has been changed or memory cleared, enter the factory settings indicated on the Adjust
Mode label affixed to the inside of the Front Door.
Factory Setting
"
Adjust
Touch Panel
Display
Operation
A0
Lens Focus
Corrects the focal length of the Lens. (Match the grouping of the Lens being
used.)
Setting
49
50
51
Description
Short focal length
adjustment
Standard
Long focal
length adjust-
ment
A1
Lens Full Size
Position
Adjusts the zoom ratio in the crosswise direction by varying the Lens full
size position.
Setting
43
50
58
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
Description
Reduction
direction
Enlargement
direction
A2
Mirror Full
Size Position
Corrects the optical path length of the Mirror with respect to the Lens focal
length.
Setting
43
50
58
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
Description
Reduction
direction
Enlargement
direction
A3
Feed Direction
Mag. Ratio
Adjusts the zoom ratio in the feeding direction by varying the scan speed.
Setting
46
50
54
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
Description
–1.6% (Reduc-
tion direction)
+1.6% (Enlarge-
ment direction)
0%
. . . . . . . . .
. . . . . . . . . .
A4
Scan Regist
Full Size
Corrects the amount of offset along the leading edge in the full size mode
by varying the Synchronizing Roller start timing.
Setting
40
50
60
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
Description
–5.0mm
(Smaller)
+5.0mm
(Greater)
"
0
. . . . . . . . . . . . . .
. . . . . . . . . . . .