Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-28
1156SBM1105A
11-5. Scanner and 2nd/3rd Mirror Carriage Movement
The Scanner and 2nd/3rd Mirrors Carriage are moved by the Scanner Drive Cable fitted
in the rear side of the copier. The Cable is driven by Scanner Motor M2.
Both the Scanner and 2nd/3rd Mirrors Carriage slide along the Scanner Shaft at the rear
side. While at the front side, there is a Slide Bushing attached to the underside of each
of the bodies and that Bushing slides over the Slide Rail. The speed of the Scanner and
2nd/3rd Mirrors Carriage varies with different zoom ratios.
Scanner Reference Position Sensor PC81 detects the home position of the Scanner and
2nd/3rd Mirrors Carriage. If they are not at the home position when the copier is turned
ON, M2 is energized to move them to the home position.
2nd Mirrors Carriage
Scanner Shaft
Scanner Motor M2
Scanner Reference
Position Sensor PC81
1156M013AA
1st Mirrors Carriage
Rear
Front