Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-54
1156SBM1601A
16-1. Spent Toner Collection
(1) Toner Conveying/Collecting Mechanism
D
The toner which has been scraped off the surface of the PC Drum by the Cleaning
Blade is conveyed by the Toner Conveying Coil towards the rear of the copier and falls
into the Toner Collecting Box at the back of the copier through the pipe.
D
The Toner Antispill Mylar is affixed under the Cleaning Blade to receive toner, thus pre-
venting any toner from failing down onto the surface of the copy paper or the paper
path.
Toner Conveying Coil
1136M061AA
1136M062AA
Cleaning Blade
Toner Conveying Coil
Residual Toner
Toner Antispill Mylar
Spent Toner Flow
Toner Conveying Coil Drive
Gear (Copier)
Toner Conveying Coil Drive
Gear (PC Unit)
Pipe
D
The type of Toner Collecting Box and the method of detecting an installed box differ
between the applicable marketing areas. See the following table.
Areas
Type of Box
Box-in-Position
Detection
EP5000
All areas
Large-Capacity Toner
Collecting Box (in Cabinet)
PC31 (in Cabinet)
U.S.A., Canada,
and Europe
Large-Capacity Toner
Collecting Box (in Cabinet)
PC31 (in Cabinet)
EP4000
Other areas
Standard Toner collecting Box (in
copier)
PC107 (in Copier)