Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-73
(3) Paper Pressure Releasing Mechanism
D
If the drawer is pulled out while the paper is between the Feed Roll and the Separa-
tor Roll, the paper is left in the copier. Removal of the paper is difficult. With this
copier, sliding out the drawer automatically disengages the paper and Paper Take-
Up/Feed Roll.
D
The Paper Pressure Releasing Mechanism makes it easier to remove a sheet of
paper held between the Feed Roll and Paper Separator Roll by just sliding out the
drawer. When the drawer is pulled out, the pressure release rail pushes down the
Separator Roll Assy, disengaging the Feed Roll from the Separator Roll.
<Drawer in Position>
<Drawer Slid Out>
Feed Roll
Separator
Roll Assy
Drawer
Pressure Spring
Approx. 2mm
4444M004AA
(4) Paper Take-Up Roll Retraction Mechanism
D
When the drawer is slid out, the rear end of the drawer on the take-up side and the
Pressure Release Lever push up the Paper Take-Up Roll/Feed Roll, freeing the pa-
per from the Paper Take-Up Roll.
Pressure
Release
Lever
Paper Take-Up
Roll/Feed Roll Assy
1134M021AA
Front
Rear
