Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-77
1156SBM1901A
19-1. Paper Take-Up Mechanism
The Paper Take-Up Rolls are normally in their raised (retracted) position so that
they will not hamper proper loading of paper. When the Start Key is pressed, Manual
Feed Paper Take-Up Solenoid SL4 is deenergized causing the Paper Take-Up
Rolls to press the paper stack downward and take up a sheet of paper.
Paper Stoppers are provided that block the leading edge of the paper stack as it is
loaded on the Table, preventing any portion of the leading edge of the paper from
getting inside. These Stoppers are unlocked at paper take-up, allowing paper into
the copier.
Manual Feed Paper Take-Up Clutch CL3 controls the turning and stop of the Paper
Take-Up Rolls.
Lock Levers
In Standby
At Take-Up
Lever
Rack Gear
Manual Feed Paper Take-
Up Solenoid SL4
Paper Take-Up
Rolls
Paper Stoppers