SELECTING THE FLASH-MODE
SELF-TIMER
REWINDING THE FILM
AUTOFLASH
FILL FLASH
FLASH CANCEL
NIGHT PORTRAIT
LANDSCAPE / NIGHT VIEW
MANUAL REWIND
FLASH RANGE
RED-EYE REDUCTION
The camera has five flash-modes. Press the flash-mode button until the corre-
sponding indicator is displayed on the data panel. Each time the flash-mode but-
ton is pressed the mode cycles as shown. When the camera is turned off, the
mode is reset to autoflash.
Autoflash
Fill flash
Flash cancel
Night portrait
Landscape / Night view
The flash will fire automatically in low-light. This is the default flash mode.
• The flash charges when the shutter-release button is
pressed partway down. When the indicator lamp glows,
the flash is charged and ready to fire.
The flash range depends on the film speed and focal length in use. To ensure
proper exposure, the subject must be within the flash range.
•
Flash ranges apply to color negative film only.
When the shutter-release button is pressed partway
down, the self-timer/red-eye reduction lamp on the
front of the camera will automatically glow to reduce
the red-eye effect in portraits. Press the shutter-release
button part way down for a few seconds before taking
pictures. This function is active with all flash modes
The self-timer delays release of the shutter for approximately 10 seconds after
the shutter-release button is pressed.
1. Place the camera on a tripod. Press the self-
timer button until the self-timer indicator
appears on the data panel.
2. Place the subject in the focus frames and press
the shutter-release button partway down to lock
the focus and charge the flash.
• When the indicator lamp glows, the focus is locked; the
picture can be recomposed.
3. Press the shutter-release button all the way
down to start the self-timer countdown.
•
will blink on the data panel. The self-timer lamp on the
front of the camera will blink slowly during the countdown,
then rapidly just before the shutter is released.
• The autofocus and exposure is locked when the shutter-
release button is pressed. Do not stand in front of the cam-
era when starting the self-timer.
• To cancel the self-timer, press the self-timer button or turn
the camera off.
• The self-timer is automatically canceled after the shutter
releases.
The flash will fire when the shutter is released regard-
less of lighting. Use fill flash to reduce harsh shadows
on your subject's face, or in back-lit situations.
Press the flash-mode button until the fill-flash
indicator (
) appears on the data panel. Take the
picture as described in the basic operation
section.
The flash will not fire. Use flash cancel when flash
photograph is prohibited, the subject is beyond the
flash range, or to preserve the natural lighting.
Press the flash-mode button until the flash-cancel
indicator (
) appears on the data panel. Take the
picture as described in the basic operation
section.
• Shutter speed may be slow. The use of a tripod is recom-
mended.
In the night portrait mode, the camera balances the
flash and existing light exposures for pictures of peo-
ple in front of a sunset or night scene.
Press the flash-mode button until the night-
portrait indicator (
) appears on the data panel.
Take the picture as described in the basic
operation section.
• Shutter speed may be slow. The use of a tripod is recom-
mended. Warn your subject not to move after the flash
burst as the shutter may still be open for the background
exposure.
The flash will not fire in this mode and the focus is set
to infinity. For photographs or landscapes, night
scenery, or other distant subjects. This mode is espe-
cially useful when photographing landscapes through
windows.
Press the flash-mode button until the
landscape/night view indicator (
) appears on
the data panel. Take the picture as described in
the basic operation section.
• Shutter speed may be slow. Use of the tripod is recom-
mended.
Your camera automatically rewinds the film after the last exposure is taken.
When
blinks on the data panel, open the
back cover and remove the film
.
• Do not open the back cover until the rewind motor stops. Never use force.
• If the rewind motor stops before the film has been completely rewound, all the indica-
tors will blink. Remove and insert the battery or press the manual-rewind button.
• If the back cover does not open, turn the main switch off and on to release the film
chamber lock.
• Although more pictures than specified on the roll may be taken, the film processor may
not print more than the number specified on the film cassette.
To rewind the film before finishing the roll, turn the
camera on and gently press the manual rewind but-
ton using the button key on the strap.
Focal length
0.7- 5.3m
2.3- 17.4f t .
0.8- 2.0m
2.6- 6.6f t .
0.7- 10.6m
2.3- 34.8f t .
0.8- 4.0m
2.6- 13.1f t .
ISO100
ISO400
38mm
110mm
W(ide-angle)
T(elephoto)
Film speed
2477_E.qxd 02.11.20 14:49 Page 4
