59
EXPOSURE – Bracketing
58
EXPOSURE – Setting the ISO Manually
1. Turn the function dial to ISO.
2. Press the function button and
turn the control dial until the
desired ISO value appears in
the data panel.
Set the film speed manually when you want to override the DX-coded
film speed or when using non-DX-coded film. Film speeds can be set
from ISO 6 to 6400 in 1/3EV increments.
Film must be loaded before the ISO can be changed.
1. Turn the function dial to
.
2. Press the function button and
turn the control dial until
appears in the data panel.
•
appears in the frame counter after
the function button is released.
This function automatically exposes a 3 frame 1/2 stop increment
bracketed series. The order of the exposures will be the metered
exposure, 1/2-stop under the metered exposure, 1/2 stop over the
metered exposure.
• The automatic bracketing feature cannot bracket flash exposures.
Continued on next page.
This effect is most visible when slide film is being used.
Metered Exposure
1/2 Stop Under
1/2 Stop Over
2154-E (US).qed 3/4/98 2:42 PM Page 58
