Ϯ
. First Use
Attention!
Please insert the battery in the correct way!
2.2 Installing the Battery
Insert the lithium-ion battery into the battery compartment with the metal
contacts facing the back of the camcorder. The battery can only inserted
one way.
2.3 Charging the Battery
Connect your camcorder to the included AC adaptor with the USB cable
provided for charging. Insert the small end of the USB plug into the
camcorder
’
s port, and the larger end in to the included AC adaptor. The
status LED will light up Green when charging.
3. Close the battery door.
2. Insert the Li-ion battery into the
compartment as shown. Make sure the
contacts face the rear of the camcorder.
1. Slide the battery door switch
forward to open the battery door.
NOTE:
x
Please format the memory card before using the camcorder
(Caution, this will erase all data on the card).
x
Do not remove or insert the memory card when recording. It
may damage the card or cause data loss.
x
Memory card rating must be Class 10 or above.
Summary of Contents for MN200NV
Page 1: ......
Page 5: ...z 1 1 Camcorder Interface Top View Bottom View Side View Front View Rear View...
Page 33: ......
