Performing a Scan to PC (FTP) Operation
6
Scanner Mode
6-1
6
Performing a Scan to PC (FTP)
Operation
6.1
Basic Transmission
✎
Note
The FTP server application must be running on the client computers.
With the Scan to PC (FTP client) operation, the following settings are
used and data is sent by FTP.
If necessary, specify the following settings from the FTP server
application on the computer at the receiving end.
Login: anonymous
Password: E-mail address of this machine
1
Position the document(s) to be scanned.
2
Press the [Fax/Scan] key.
❍
For a copier, press the [Scan] key.
3
Select an index, and then
select a recipient from the
list of one-touch keys.
Specify the recipient in any
of the following ways.
❍
Select a recipient by
searching for it by name.
→
Refer to page 4-6.
❍
Type in the number of
the one-touch key for the
desired recipient.
→
Refer to page 4-8.
Summary of Contents for Scanner Mode
