Specifying Management Settings
13
Scanner Mode
13-11
13.4
Displaying the Administrator Management screen
The procedure for displaying the Administrator Management screen,
which contains various operations that can be performed or functions
whose settings are specified by the administrator, is described below.
Displaying the Administrator Management screen
1
Press the [Utility] key.
2
Touch [Admin.
Management].
3
Type in the administrator
access code (maximum 8
digits), and then touch
[Enter].
Refer to “Specifying
Administrator Settings” in
the Advanced Operations
volume of the copier’s User
Manual.
4
Touch [Admin. 1] or [Admin.
2], and then select the
operation that you wish to
perform or the function
whose setting you wish to
specify.
Summary of Contents for Scanner Mode
