Specifying Management Settings
13
Scanner Mode
13-55
13.13.10Specifying Settings Concerning the Transmission
Interval for Divided E-Mail Messages (Mode 372)
You can specify the time interval for transmitting divided e-mail messages.
Setting during production
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side are page number with
descriptions for the corresponding function.
* A setting between “0000 0001” (HEX value: 01) for 1 second to “1111 1111” (HEX value: FF)
for 255 seconds can be specified.
When specifying the setting, refer to the HEX table.
Bit
7
6
5
4
3
2
1
0
Setting
0
0
0
0
1
1
1
1
(HEX:0F)
Bit
Function
Setting
Description
Page
referen
ce
7, 6, 5,
4, 3, 2,
1, 0
Specifies the time interval
for transmitting divided e-
mail messages.
00000101
5 seconds
p. 3-3
00001010
10 seconds
00001111
15 seconds
00011110
30 seconds
00111100
60 seconds
01011010
90 seconds
01111000
120 seconds
10010110
150 seconds
10110100
180 seconds
11010010
210 seconds
11110000
240 seconds
00000000
*Do not change this
setting.
Summary of Contents for Scanner Mode
