Reports and lists
14
Scanner Mode
14-3
6
Transmission results details
• OK: The transmission was completed correctly.
• BUSY: Appears only when a fax is transmitted using a common
telephone line. Refer to “Confirming Transmission Details” of the
User Manual.
• NO ANS: Appears only when a fax is transmitted using a common
telephone line. Refer to “Confirming Transmission Details” of the
User Manual.
• INTERR: The transmission was interrupted.
• F.MEM: The memory is full.
• NG: The transmission failed.
• PT.DEL: Part of the transmission failed.
• F.DATA: The data exceeded the amount that can be transmitted.
• IMG NG: The transmission failed due to an image error.
• Error Code: Refer to
“Transmission Results Error Codes” on
page 15-3
.
7
Name of account used
8
Size
Indicates the amount of data after data conversion when transmitting
through a LAN.
Therefore, the amount of data that appears at the receiving end and
the amount of data that appears on this copier's report is different.
Summary of Contents for Scanner Mode
