Minolta Scanner Mode User Manual Download

Page: 92 / 314

Performing a Scan to Server (FTP) Operation

Scanner Mode

5-1

Performing a Scan to Server (FTP)
Operation

5.1

Basic Transmission

Position the document(s) to be scanned.

Press the [Fax/Scan] key.

❍

For a copier, press the [Scan] key.

Select an index, and then
select a recipient from the
list of one-touch keys.
Specify the recipient in any
of the following ways.

❍

Select a recipient by
searching for it by name.

→

Refer to page 4-6.

❍

Type in the number of
the one-touch key for the
desired recipient.

→

Refer to page 4-8.

Summary of Contents for Scanner Mode



























































































































































































































































































































Search results

Summary of Contents for Scanner Mode

Reviews:

Related manuals for Scanner Mode

Brands by name

Popular brands

Minolta Scanner Mode, User Manual

Search results

Summary of Contents for Scanner Mode

Reviews:

Related manuals for Scanner Mode

Brands by name

Popular brands