19
Charging the Battery by USB
In other way charging the battery, you can use the USB cable to connect the
camera with PC or USB adapter.
1.
Connect the camera with the USB cable
as shown.
2.
Connect the other end with the USB
adapter and plug it into a power outlet
or with the USB port of PC directly for
charging.
•
When the battery is charging, the
LED indicator flashes.
•
When the battery is fully charged,
the LED indicator goes off.
•
When the battery is unusual charged,
the LED indicator flashes rapidly.
•
When the camera charges without
the battery inside, the LED indicator
goes off.
It's recommended not operating the camera when charging. Actual
charging time depends on current battery capacity and charging
conditions.
You can also charge the battery with Apple adapter. Its power
output meets the standard 5V/500mA.
Turning the Power On and Off
There are two ways to turn on the camera:
•
Press the
Power button
, the startup image displays briefly and the startup
sound plays if enabled. The zoom lens extends and the camera is turned on in
Record mode.
•
Press the
Playback button
, the camera is turned on in Playback mode. The
zoom lens is not extended.
To turn off the camera, press the
Power button
.
See "Modes" on page 20 to know more about Record and Playback mode.
Summary of Contents for Super Zoom M35Z
Page 1: ......
Page 12: ...11 Right View 21 Strap ring Left View 22 Flash button 23 Strap ring 24 USB Out...
Page 90: ......