background image

Important Notes

• For use with a standard 2-wheel bike with the wheel size between 650c and 700c or 26 and 29 inch 

and the wheelbase size between 950 and 1,200mm. 

Any longer wheelbase bike such as a tandem or long-tail or other types of bike such as recumbent 

or folding bike won't fit FG540.

• The front hub is 100mm width and equipped with 9mm standard or 15mm thru-axle type. Any other 

hub size cannot be used.

Boost hub and 12mm Thru Axle can be used by using the optional adapter (sold separately).

• The rear triangle of your bike rides freely on the roller. Be careful not to fall down while getting on or 

off the bike. Use the handlebar to steady yourself put do not pull on the bars as this may cause the 

bike to tip.

  The best way to mount the trainer is to stand close to the side of the saddle. Center yourself low 

and to the center of the bike, clip into one pedal then slowly swing your other leg over the bike and 

clip into the second pedal.

• The quick release skewer in the front fork support is floating mounted with a plastic bushing to avoid 

the damage caused by side-to-side shaking during riding. For this reason, the bolts which hold the  

bushing are not fully tightened intentionally and there is some space above the bolt.

• Minoura recommends the use of a completely slick (no tread) tire to reduce noise and increase the 

longevity of the tire and rollers.

• The FG540 comes equipped with a standard quick release skewer (Q/R) for the front fork mount. 

Tighten the Q/R as you would your wheel to your bike, close it firmly and tightly.

  If you are unsure, consult your local bike shop for help.
• Your rear tire must contact both rollers evenly. Adjust the center arm/frame exactly.

Incorrect adjustment will result in unbalanced resistance and poor bike stability.

• For your safety, place the FG540 on a flat, even floor or surface. Make sure all legs are fully opened. 

Make sure to check the trainer stability, especially when raising the front fork mount.

• DO NOT USE YOUR BRAKE TO REDUCE SPEED!

  Doing so will decrease stability, cause your tire to burst or throw you off the bike. Simply reduce your 

cadence and let the bike come to a natural stop.

• Keep the children and pets away from the spinning wheel or moving parts.
• It's impossible to change to non-remote type. Removing the remote shifter will automatically set the 

resistance level at the maximum position.

• Minoura recommends to use a mat underneath the trainer to protect the floor from sweat or stain 

from the rubber feet.

• If you hear a strange noise or smell something unusual, immediately stop using the the trainer and 

contact your Minoura dealer. Do not try to disassemble the product without consulting your dealer  

or Minoura first.

• Any warranty will be void if you use FG540 for other purpose than instructed.

Minorua offers 1-year limited warranty on this product from the date of your purchase for any 

problem caused by manufacturer's defect. Natural wear will not be covered.

Any damage or problem caused by transporting process is not covered under warranty. Any damage 

from shipping or moving must be made to the shipping company.

Read the enclosed "Minoura Limited Warranty Policy" card for more detail.

For the latest information, refer Minoura web site (http://www.minoura.jp).

- 2 -

Please Read Carefully Before Use

Summary of Contents for FG540 HYBRID ROLLER










Reviews: