IMPORTANT NOTICE
• For use with mini-velo or BMX with the tire sized between 17x1-1/4 and 20x1-1/8 only.
If the actual tire outer diameter is larger than 512mm, the tire may conflict with the plastic housing
of the Mag unit. Please check if the tire doesn't touch GM-7 (Drive Roller Holder), especially when
using 20 x 1-1/8" (ETRTO 28-451) size tire. On this case, you should remove GM-11(Rubber Shim)
between the Mag unit and the base plate.
• LR240 fits the hub width between 125mm and 140mm.
Hub nut type rear wheel axle is not compatible with LR240 in standard. You need to replace the left
side coupling bolt (UF-8) to the optional "Left Side Coupling for Hub Nut Axle (UF-8L)".
• Some assembly required. Use correct tools (10mm spanner & M4 hex wrench). Tools are not
supplied in this kit.
• Use the supplied rear quick release skewer for maximum stability.
Minoura is not responsible for any problem caused from using your own skewer.
• Use on flat and level floor or ground, and fully open the legs for your safety.
• Adjust the roller pressure to the rear tire properly in order to maximize your tire life. And you should
maintain the tire air pressure 10% higher than your usual level for this purpose
Tire and roller contact will eventually wear both your tire and the trainer roller.
• LR240 is a tire drive model, so if you use LR240 with a knobby tire on BMX, a loud noise must
occur. To avoid this problem, replace the rear tire to a slick pattern one.
Do not use LR240 for removing the mud from the tire.
• Touching the spinning wheel and/or any other moving parts while training may cause serious injury.
Keep children and pets away from the trainer when in use.
• It is not possible to convert the non-remote resistance unit to the remote control version one due to
a difference in the inside mechanism.
• If you feel any strange noise or smell, stop using LR240 immediately and contact the retailer where
you purchased the LR240.
• Any warranty will be void if you use LR240 for other purpose than instructed.
Minorua offers 1-year limited warranty on this product from the date of your purchase for any
problem caused by manufacturer's defect.
Any damage or problem caused by transporting process is not covered under warranty. Any damage
from shipping or moving must be made to the shipping company.
Read the enclosed "
Minoura Limited Warranty Policy" card and refer Minoura website (www.
minoura.jp) for more details.
- 2 -
