background image

- 2 -

Important Notes

• For a standard 2-wheel bike with the wheelbase size between 950mm and 1,080mm only.

Any other bikes such as tandems, recumbent, folding bike or the bike with out of the applicable wheelbase 

range cannot be used on R720.

• Triple roller trainers require the rider to be balanced at all times. If you are new to rollers it is strongly 

recommended that you set the R720 next to a wall or handrail so you can use either to regain your balance 

should the need arise.

Falling off can cause injury. Keep the ground around the R720 free from clutter.

• R720 is height adjustable to compensate for uneven or slanted floors. The rollers should be on a flat surface 

with the rollers making contact completely with the floor. Riding on a slanted floor may cause imbalance 

issues and could result in damage or injury if you don't adjust the foot height correctly.

• Requires some assembling. Use correct tools (10mm & 17mm spanner, M4 hex wrench). Any tools other than 

M4 hex wrench are not included in the kit.

• Be careful not to pinch your fingers in the frame while adjusting the roller belt and closing the frame.

• Make sure both side frame stoppers are set in the exact same position. Failure to do so means the rollers will 

be uneven causing undo wear, noise, and decreased bike stability.

• Keep both hands on your handlebars at all times while on R720.

Do not brake while on the rollers. Doing so may cause a serious accident.

Simply stop pedaling and wait for the bike to stop when quit the training.

• Hi RPM's are generated on rollers. Keep children and pets away from your wheels.

  Use R720 on a bare or tile floor if possible. 

• Indoor training traps more heat than when you train outdoors. Be sure you are healthy enough to attempt 

exercise indoors and on a roller. Consult a professional before attempting any workout regime.

• Any rubber roller parts and your sweat can cause stains. It is recommended to use a mat between the rollers 

and your floor.

• If you feel any strange noise or smell while using R720, stop exercise immedialtely and ask to the shop you 

purchased R720. Do not try to disassemble or modify the product without prior approval by Minoura.

• Minoura shall offer 1-year limited warranty to this product from the date of purchase for the owner who 

originally purchased it in brand-new condition at Minoura authorized dealer. Any other problems than the 

things caused by manufacturer's defect such as natural wear will not be covered by this program. For more 

detail, please refer the attached "Minoura Limited Warranty Policy" card and Minoura web site.

• 

Note: Accessories designed for other Minoura rollers are not compatible with R720. This includes other foot 

steps, front wheel guards, Mag units, or carrying bags.

Please read carefully before use

Summary of Contents for LiveRoll R720









Reviews: