Contact
Made in Japan
If you have any trouble with this product or request for maintenance, refer the attached "Minoura
Limimted Warranty Policy" card first, then contact the shop you originally purchased this
product or the distributor in your country. The distributor list is found on our web site.
(ver.1.0 2019/2)
Merit of Direct Drive
LSD9200 "Kagura" Direct-Drive works with your current bike frame when you remove your
wheel and mount your frame directly to the unit. Direct-Drive eliminates any potential power loss
from traditional trainers because there is no chance of tire slippage and it transmits all the power
you generate to the electric motor.
The precisely tuned resistance unit eliminates all the noise and vibrations usually associated with
indoor trainers and provides a very smooth and quiet training session anytime.
Instructions Manual
Direct Drive Bicycle Trainer
(Sprocket gear is sold separately)
Compatibility
Kagura-DD is compatible with Shimano and SRAM 8s, 9s, 10s and 11s. Campagnolo is currently
NOT supported. You need to prepare the rear sprocket gear that fits your bike component
separately.
The AC Adapter is capable with worldwide voltage 100V – 240V, but the electric plug design
must fit your country's regulation. If you need to change the plug that came with your trainer, it
is available as an option for purchase.
We strongly recommend visiting the
Minoura website regularly to check for
updates to the Kagura firmware.
For more info, check out ...
http://www.minoura.jp/english/trainer/smartturbo/
lsd9200.html
and click "Firmware Updates" button.
MINOURA North American Tech Center
MINOURA Japan Headquraters
(for U.S. residents ONLY)
(for ALL customers)
Hayward, California, U.S.A.
134-1 Shimomiya, God, Anpachi, Gifu 503-2312 Japan
Phone: 1-510-538-8599 (8 am - 5 pm, Mon - Fri, PST)
Fax:
+81-584-27-7505
Fax:
1-510-538-5899
Email:
minoura@minoura.jp
Email:
support@minourausa.com
Web:
www.minoura.jp
