13
Battery capacity
Record mode
(Video mode)
Resolution
Video length
Available
memory
4. Press the up / down buttons (17, 18) to choose the
time and date setting and confirm with OK (19).
5. Use the right / left buttons (28, 29) to select the
time or date setting in the menu and then the up
/ down buttons (17, 18) to make your desired set-
tings. Confirm with OK (19).
6. Push the menu button (25) to exit the main menu.
Your ACX 200 WiFi is now configured with the time
and date that you have set.
Note
: Please make sure that the correct time and
date has been set as your MINOX ACX 200 WiFi
includes this information in the meta-data of your
photos and videos.
Recording a video
1. Push the on / off switch (8) to “On”.
2. Point the camera towards the object you wish to
record and look at the preview in the TFT display.
3. Push the record button (7) once to begin recording
your video.
4. You will hear an acoustic signal after pushing the
record button. This indicates that the camera is
now recording. The green LED will blink slowly and
the video timer will start.
5. To stop recording the video, push the stop button
(31) once. The camera will beep twice to indicate
that the camera has stopped recording, and the
video timer will now stop. The display will return
to standby mode.
