33
described in the section “Using the memory
card”. Bring your camera into the “SETUP”
mode (Main Switch (11), centre). Go to the
Main Menu by pressing the menu button (14)
and select the menu option “Updates”. This
is located under the tab “General Settings”.
Press the OK button (10) to access the sub-
menu. Using the Up/Down arrow keys, you
can select “Yes” or “No” and confirm with
OK. (10). Select “No” to retain the existing
software version and the camera will return
to the previous menu selection. If you select
“Yes”, your DRTC 650 will begin installing the
updates. The update installation is completed
once your camera screen turns black. Please
switch your DTC 650 now to “OFF” function:
Main Switch, left. When you switch on the
camera the next time in the “SETUP” mode,
Main Switch (11), centre, the new software is
ready for use. Press the left arrow key (10) to
return to the previous menu without installing
the updates.
Note:
Please note that the process de-
scribed above must be followed precisely.
Any deviation or infringement may cause
the update configuration to fail. You may
not be able to use the camera. In that case,
all warranty claims will be void.
Connecting the camera
to a Computer
There are two ways of transferring the data to
your computer: either you can take out the SD
card and read it on the computer or you can
connect the DTC 650 to your computer using
a USB cable included in the package.
Connect using the USB cable
Always ensure that the camera is switched
off before you connect it to your computer.
Connect your camera to the computer
using the included USB cable via the USB cable
slot (13). Switch on the camera. The camera
will be recognized as a removable medium,
pictures or video clips can be directly viewed
or transferred to the PC.
Transferring pictures and
videos via SD card
Always ensure that the camera is switched
off before the SD card is removed from the
camera slot (9), else the memory could be
damaged. Take the memory card from the slot
(9) in the camera and insert it in the memo-
ry card reader connected to your computer.
Some computers also have an internal slot
for SD cards. In such a case, the SD card can
be directly connected to your computer. The
pictures or video clips can now begin to be
transferred to the computer.
MPEG-4 Visual Patent
Portfolio License
This MINOX DTC 650 is licensed under the
MPEG-4 Visual Patent Portfolio License for
personal and non-commercial purposes to
1. encode video in compliance with the
MPEG-4 standard and/or
2. decode MPEG-4 video that was encoded
by a consumer engaged in a personal
and non-commercial activity and/or was
obtained from a video provider licensed
to provide MPEG-4 video.
For other purposes, no license is granted or
implied for the MPEG-4 standard.
Further information can be obtained from
MPEG LA, LLC on http://www.mpegla.com
Summary of Contents for DTC 650
