worse, worst for options).
Rate (Kb / s):
Set the video bit rate (main stream default 4096Kb/s, 64-40960Kb/s optional; secondary stream
default 512Kb/s, 64-40960Kb/s optional).
Frame rate (F/S):
Set the video frame rate (main/ secondary stream default 25F/S, main stream 5-60F/S
optional, secondary stream 5-30F/S optional).
Key frame interva
l: Set the key frame interval (main / secondary stream default 75F, main stream 1-300F
optional. secondary stream 1-150F optional).
Key frame minimum QP
: Set the key frame minimum QP (default 10, 10-51 optional)
Stream Name
: When streaming via rtsp or rtmp, user can modify stream name. Main Stream (live/av0),
secondary stream (live/av1)
Click the "Save" button to display the "saved successfully" message, then settings take effect.
2) Stream Release
Switch:
To turn on/off the main / secondary stream.
Protocol:
primary / secondary stream applies RTMP protocol.
Host Port:
server port number (default 1935, 0-65535 optional)
Host Address:
server IP addresses (default 192.168.5.11)
Stream Name:
choose a different stream name (live / av0, live / av1 optional).
User:
Set the user name.
Password:
Set the password.
Click on the "Save" button to display the "Save successful" message, then settings take effect.
Method of obtaining RTSP: RTSP: // device IP address: 554 / live / av0 (av0 mainstream; av1 secondary stream)
3) RTP Broadcasting
Main/Sub Stream:
On/off
Protocol:
RTP or TS
Address: Default
224.1.2.3. It can be edited.
Port: Main Stream Default Port:
4000, Sub Stream Default Port: 4002
Visit:
Address comes up after setting. Eg ; rtp: //224.1.2.3:4000; udp: //@224.1.2.3:4000
3)Video Parameters
a.
Focus: Focus mode, focus range, focus sensitivity can be set.
Focus Mode: set the focus mode (the default auto, manual optional)
Focus range: set the focus range (the default middle, the upper and lower optional)
Focus Sensitivity: Set the focus sensitivity (default is low, high, medium optional)
b.
Exposure: Exposure mode, exposure compensation, back light compensation, anti-flicker, gain limit,
wide dynamic, shutter speed, aperture value and brightness can be set.
Exposure Mode:
Set the exposure mode (the default automatic, manual, shutter priority, aperture priority,
Brightness priority optional)
Exposure compensation:
Exposure compensation setting is active when it is auto status (default is off).
Exposure compensation value:
Set the exposure compensation value, valid when it is set for auto (default 0, -7
to 7 optional).
BLC
: Set back light compensation, valid when it is auto status (default is off).
Anti-flicker:
Set up anti-flicker mode, valid when status of automatic, aperture or brightness priority (default
50Hz, closed, 60Hz optional).
Gain limit:
set the gain limits, auto, active when it is status of aperture or brightness priority (default 4, 0-15
optional).
Dynamic range:
Set the dynamic range (default 4, 1-8 optional).
Shutter speed:
Active when it is status of manual or shutter-priority (default 1/100
,
1/25,1/30,1/50,1/60,1/90,1/100,1/120,1/180,1/250,1/350,1/500,1/1000,1/2000,1/3000,1/4000,1/6000,1/10000
optional).
Aperture value:
Set the aperture value, active when it is status of manual or aperture-priority(default F1.8,
closed F11, F9.6, F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2.8, F2.4, F2.0, F1.8 optional).
Brightness:
Set the brightness value, active when it is a state of brightness priority (default 7, 0-23 optional).