factory default configuration; b. through the recovery menu; c. remote control shortcut * # 6;
Choose one of the above three ways. The IP account and password of mode a are also restored to default.
5) Restore factory setting
Click on pop-up "Restore Factory Defaults" button and choose “yes” or “no”, then the device will restart
automatically and restore factory setting.
6) Reboot
Click on the pop-up "Reboot" button and choose “yes” or “no”, then the device will restart automatically.
4.2.8 Logout
Point "Logout" pop-up "Confirmation" dialog; select "Yes" or "No", choose “Yes” to exit the current page and
return to the user login interface again.
4.2.9 Wireless Network
If the user's equipment has a wireless network module, Web page "Network Configuration" has "Wireless
Network" configuration page, the specific configuration is as follows:
1) Network settings
Wireless network configuration:
Network interface enable:
can check,to set the following items after checked.
DHCP:
can check, if check, it can obtain IP automatically.
IP address: set wirelss WIFI IP(default 192.168.1.250 ,if checked DHCP,IP could assigned
automatically)
Note:
wireless IP address can not be in the same segment with wired IP address.
Subnet Mask:
Set the wireless IP subnet mask (default255.255.255.0)
Default Gateway:
Set the wireless IP default gateway (default 192.168.1.1)
SSID:
The user can modify their own (the default test)
Encryption:
can check, the password can be set after checked.
Password:
can set password, password can be changed if only checked encryption.
Click on the "Save" button to display "Parameter saved successfully" message, set to take effect
Note: SSID and password should be filled in correctly, otherwise, if restarted after the powered off, the wireless
WiFi connection is not successful.
2) WiFi hot link
Click on the “search” button to search the WIFI hotspot.
Double-click the dialog box after searched user WIFI hotspot, and then input password to connect WIFI. It
connected successfully after shown “successful connect” window.
3) Wireless WiFi login page
If you do not check the above configuration DHCP (automatically obtain IP),then open the browser, enter the
wireless network IP address in the address bar (default 192.168.1.250),press Enter to log construction; If you
checked DHCP, then you obtain IP automatically, just login specific router or switch user interface settings to
view the allocation of IP address.
