Batteries
Batteries are the most expensive component of a UPS sys-
tem. Protect them and extend their life with the Smart Battery
Management System (SBMS). SBMS continuously monitors
battery status and recharges whenever necessary, so you have
worry-free battery power.
Matching battery cabinets make your CPE look great and allow
you easy battery access.
Battery Specifications
Battery Run Time Reference (Internal Battery)
Communications Options
Battery Type:
Sealed Lead Acid Maintenance Free
Quantity (pcs) (1kVA / 2kVA / 3kVA)
3
6
8
Voltage (VDC) (1kVA / 2kVA / 3kVA)
36
72
96
Recharge Time
8 hours to 90%
Load
1 kVA
2 kVA
3 kVA
400VA / 280W
28 Min.
63 Min.
96 Min.
800VA / 560W
9 Min.
25 Min.
72 Min.
1000VA / 700W
8 Min.
17 Min.
24 Min.
1500VA / 1050W
10 Min.
18 Min.
2000VA / 1400W
7 Min.
14 Min.
2500VA / 1750W
10 Min.
3000VA / 2100W
8 Min.
Extended
batteries with
matching
cabinets can
extend run times
to virtually any
length of time.
True Relay Card
A 10-pin terminal is supported to offer the signals of Bypass, Utility Normal/Failure, Inverter On, Battery Low, Battery Bad, UPS
Alarm, and UPS Shutdown.
AS/400 Card
A DB9 port is supported to offer the signals of Bypass, Utility Normal/Failure, Inverter On, Battery Low, and UPS Shutdown.
WEB/SNMP Card
Integrates multi-network communication protocols to enable comprehensive, easy-to-understand and secure remote monitoring and
management of the UPS via the Internet.
www.sizemyups.com
800.238.7272 |
+1 972.446.7363
MINUTEMAN
®
CPE
™
Series
True On-line UPS Systems
