17
English
120VAC
400VA / 200W
600VA / 300W
Protection
Waveform Type
Over-Current, Short-Circuit Protected and Latching Shutdown
Simulated Sine Wave
Frequency
50/60Hz, +/-0.5Hz (unless synchronized to utility)
Nominal Voltage
Maximum Power Capacity
6-8 ms Typical
>90% (Full Load)
Resettable Circuit Breaker
50 or 60 Hz, +/-5Hz, autosensing
0 - 160VAC
100 - 140VAC
120VAC: 100 - 140VAC
Transfer Time
Efficiency (Normal Mode)
Input Protection
Frequency Limits
Voltage Range
Acceptable Input voltage
EN400
Model Number
SYSTEM SPECIFICATIONS
Voltage Range
OUTPUT NON-BATTERY OPERATION
INPUT
Number of Phase
Single (1
∅
2W +G)
Nominal Voltage
120VAC
Low Voltage Transfer Point
96V(+/-3%) resets to Utility Power at 101V(+/-3%) or higher
High Voltage Transfer Point
146V(+/-3%) resets to Utility Power at 140V(+/-3%) or lower
Frequency Range
60Hz: 55 - 65Hz or 50Hz: 45 - 55Hz
OUTPUT BATTERY OPERATION
Voltage Regulation
N/-5% (until Low Battery Warning)
Overload Capacity
105% for 10-seconds, 115% Shutdown Immediately
EN600
Runtime: Full Load (minutes)
Runtime: Half Load (minutes)
10
2
Surge Energy Rating
320 J
PHYSICAL
Weight - Net
Size - Net L X W X H
Size - Shipping L X W X H
Weight - Shipping
6.44 lbs (2.92 Kgs)
11.97 x 4.84 x 3.35" (304 x 123 x 85 mm)
15.0 x 8.20 x 5.43" (380 x 208 x 138 mm)
8.0 lbs (3.3 Kgs)
7.05 lbs (3.20 Kgs)
8.0 lbs (3.6 Kgs)
Safety Approvals, EMC
REGULATORY COMPLIANCE
UL1778, cUL (CSA 22.2 no. 107.1), FCC Class B
