background image

Page  8

Orbit 20 Pro Floor Finisher 988778 Rev A 09/21

Important Safety Instructions

When using an electrical appliance, basic precautions should always be followed, including the following:

•  Your Orbit 20/28 Pro Floor Finisher is equipped with a safety switch lock and power switch triggers de-

signed for your safety. Do not attempt to bypass or defeat the safety switch lock. Never use any device to 
lock the power switch triggers in the “ON” position.

•  Do not leave the machine plugged in. Turn off  the switch and unplug the electrical cord when not in use and 

before servicing or changing the brushes or pads.

•  Do not allow the machine to be used as a toy. Close attention is necessary when used near children. Do not 

leave the machine connected to an electrical outlet unattended.

•  Use only as described in this manual. Use only manufacturer’s recommended attachments.

•  Do not use with a damaged cord or plug. If the machine is not working as it should, has been dropped, dam-

aged, or left outdoors, return it to a service center before using.

•  Use care to keep the electrical supply cord around sharp edges or corners. Keep the cord away from the 

heated surfaces.

•  Connect to properly grounded (3-wire) outlet only. Refer to Grounding Instructions.

•  Do not use extension cords or outlets with inadequate current carrying capacity.

•  Turn off  all controls before unplugging.

•  Do not unplug by pulling on the cord. To unplug, grasp the plug and pull.

•  Do not handle the plug or the machine with wet hands.

•  Wind the cord no tighter than is necessary to retain it during storage. Refer to Cord Storage.

•  Use extra care when working on or near stairs.

•  Do not use in conjunction with fl ammable or combustible liquids such as gasoline, or use in areas where 

explosive vapor or dust may be present.

•  Store your Orbit 20 Pro Floor Finisher indoors in a cool, dry area.

•  Keep your work area well lighted.

•  WARNING

: To avoid electrical shock, use indoor only.

:$51,1*

(/(&75,&6+2&.&$1&$86(6(5,286

,1-85<25%()$7$/3/($6(5($'7+(

)2//2:,1*,16758&7,(86(

$1'23(5$7,2162))/225),1,6+,1*

0$&+,1(6

Summary of Contents for Orbit 20 Pro Plus





























Reviews: