17
Machine Overview
© 2015 Minuteman International, Inc.
X17 ECO CFS Carpet Extractor #988725UMCFS Rev. C 03/18
Solution Tank In-line Filter
The
In-line Filter
protects the water pump from large debris.
This fi lter should be cleaned regularly.
Steps to cleaning Solution Tank In-line Filter (See Figure 1):
1. Close the
Shut-off Valve (C)
by turning the handle 90
O
clockwise. When handle is perpendicular to water line the
valve is closed.
2. Next, twist the
Filter Cap (A)
counterclockwise.
3. Remove cap and
Filter (B)
, clean with water.
4. Place fi lter back into cap, turn cap clockwise onto fi lter
body, tighten by hand.
Note: Using tools to tighten
may damage plastic threads.
5. Open the
Shut-off Valve (C)
by turning the handle 90
O
counterclockwise.
Vacuum Intake Filter
The
Vacuum Intake Filter
protects the intake vacuum from
large debris. This fi lter should be cleaned regularly.
Steps to cleaning Vacuum Intake Filter:
1. Unplug machine from power source outlet.
2. Drain Solution and Recovery tanks.
3. Filter is located above CFS Power Supply Box on the
underside of the machine. Tilt machine forward on the
vacuum shoe until the fi lter is visible. (See Figure 2)
4. Once the fi lter is visible and the machine is supported in a
stabilize position - remove the fi lter. (See Figure 3)
5. Rinse and clean fi lter with water. Allow fi lter to air dry.
6. Insert fi lter back into original location.
Figure 2
Figure 3
Figure 1