10
en
3. Press
REC/OK
to complete calibration.
G-Sensor Setting:
Sets the sensitivity level (
Off
,
High
,
Medium
or
Low
) of the G sensor
that allows automatical triggering of the event recording while continuous recording is
in progress.
System settings
Language:
Sets the language.
Driver ID Setting:
This option allows you to enter the driver's name.
1. Use the / button to select the desired characters.
2. Press
MODE
to switch to the next field and repeat the step until all fields have been
completed.
3. When done, press
REC/OK
.
Date/Time:
Sets the system date and time.
1. Use the / button to adjust the value of the selected field.
2. Press
MODE
to switch to the next field and repeat the step until all fields have been
completed.
3. When done, press
REC/OK
.
LCD Standby:
Selects
Off
to keep the LCD on; or sets the timer for the LCD to turn off
automatically (
15 sec
,
30 sec
or
1 min
) after recording starts.
Power-off Delay:
The recorder can be set to turn off in specified time (
10 sec
,
30 sec
or
1 min)
after power-off. Selects
Off
to turn it off immediately after power-off.
Beep:
Enables or disables system notification sounds.
Format:
Formats a memory card. (All data will be erased.)
Default Setting:
Restores system settings to factory defaults.
Version:
Displays the software information.
Summary of Contents for MiVue R Series
Page 1: ...User Manual R Series...
