Mio VELO User Guide
09
Note:
To pair with an Android app through Bluetooth Smart, all of the following requirements
must be met:
•
Your device is running an Android version 4.3 or higher
•
Your device has Bluetooth 4.0
•
Your app supports both of the above
To find out whether your Android device meets the compatibility requirements, visit
mioglobal.com/compatibility
.
Important:
If you want to pair through ANT+, you will need a device with built-in ANT+
support, or an ANT+ dongle. (For details, visit
http://www.thisisant.com
.)
Pairing with Sport Devices such as Bike Computers
Instructions vary for each device. Follow your device manufacturer’s instructions for receiving
heart rate data from a chest strap; your device will register the Mio VELO.
MAINTAINING YOUR MIO VELO
CHARGING THE BATTERY
Mio VELO contains a rechargeable lithium polymer battery. Follow these instructions and
guidelines to maintain the battery lifespan.
Warning:
If you do not follow these guidelines, the battery life could be shortened and there
is the risk of damage to your VELO, risk of fire, risk of electrolyte leaks and chemical burns, and
risk of injury.
Battery Status
The LED light will light up and indicate the battery level every time you turn on or turn off
Heart Rate Mode.
COLOR
BATTERY POWER
Green
Battery is charged
Yellow
Battery level is below 30%
Red (flash twice)
Battery level is low and unable to provide heart rate measurement
If the battery level falls below 30% during a workout, the LED will alert you every 4 seconds by
quickly flashing red-blue-red-blue, and then resuming the heart rate zone indication pattern.
