mIoT Captis Installation Guide
March 2020
3
Rev 5
INTRODUCTION
The Captis cellular data logger has been developed to fill measurement requirements across a broad
range of applications and remote locations.
The Captis Metrum has the following features:
•
The device measures 90 x 75 x 50 mm and weighs less than 500g.
•
Is designed to interface with existing mechanical water meter via a pulse pick up unit.
•
It is battery operated and does not require an external power supply.
•
It operates on LTE-M or NB-IoT cellular networks.
•
The enclosure is IP68 rated.
CAPTIS TECHNICAL INFORMATION
CAPTIS METRUM DIMENSION
CAPTIS METRUM
1x Pulse Input
-0.3V to 3.5V
Passive Suitable for Reed SW + Open Col
Dry Contact
Maximum Pulse Frequency
10Hz
Sensor Minimum Open Resistance
1.25M
Ω
Sensor Maximum Closed Resistance
60k
Ω
Physical Size
90mm x 75mm x 50mm
Weight
Less than 500g
IP Rating
IP68
Figure 1 Captis dimensions side view
Figure 1 Captis dimensions front view
