mIoT Captis Installation Guide
September 2020
3
Rev 5
INTRODUCTION
The Captis cellular data logger has been developed to fill measurement requirements across a broad
range of applications and remote locations.
The Captis has the following features:
•
The device measures 75 x 80 x 50 mm and weighs less than 500g.
•
It is designed to interact with a range of sensors.
•
It is battery operated and does not require an external power supply.
•
It operates on LTE-M and NBIoT cellular networks.
•
The enclosure is IP68 rated.
•
Battery life of 5,000 transmissions
•
Product warranty of 5 years
The Captis Multi can be connected to a wide range of sensors through a variety of input types. The
Captis Pulse can receive pulse and switch inputs and can be connected to one or two sensors.
The Captis devices are available in variants with an internal antenna, or an external antenna as an
option. Device selection should consider the network coverage and the installation location of the
customer application. Each Captis device can be configured to capture measured data from sensors,
and to send the data to a cloud platform using MQTT and MQTTS protocol.
CAPTIS TECHNICAL INFORMATION
CAPTIS PULSE & CAPTIS MULTI DIMENSIONS
Figure 1 Captis dimensions front view
Figure 2 Captis dimensions top view
