2
BATTERY INFORMATION
Installing or changing batteries in MiP™ Arcade:
1. To change the batteries, carefully lay MiP™ Arcade on its front. Do not place MiP™ Arcade
where it could easily fall. MiP™ Arcade requires 4 x “AA” size alkaline batteries (included).
2. Using a Phillips screwdriver (not included) remove the screws on the battery compartment
cover.
3. Insert the batteries according to the diagram. Ensure that the positive and negative polarities
match the illustrations inside the battery compartment.
4. Replace the battery compartment cover and tighten screws using the screwdriver. Do not
over-tighten.
IMPORTANT BATTERY INFORMATION:
• Use only fresh batteries of the required size and
recommended type.
• Do not mix old and new batteries, different types of batteries
[standard (Carbon-Zinc), Alkaline or rechargeable] or
rechargeable batteries of different capacities.
• Remove rechargeable batteries from the toy before
recharging them.
• Rechargeable batteries are only to be charged under adult
supervision.
• Please respect the correct polarity, (+) and (-).
• Do not try to recharge non-rechargeable batteries.
• Do not dispose of batteries into fire.
• Replace all batteries of the same type/brand at the
same time.
• The supply terminals are not to be short-circuited.
• Remove exhausted batteries from the toy.
• Remove batteries if the toy is not going to be played with for
some time.
• Batteries should be replaced by adults.
• Batteries should be recycled or disposed of as per state and
local guidelines.
• Protect the environment by not disposing of this product with
household waste. Check your local authority for recycling
advice and facilities.
LOW BATTERY INDICATORS:
When the batteries grow weak, MiP™ Arcade will move very slowly and easily fall down while
moving or turning. When this occurs, power OFF and replace all batteries.
NOTE:
You will know when MiP™ Arcade’s batteries are nearly depleted because it will make
a low battery indication sound and then power off. You can also see current battery levels via
the MiP™ Arcade App.
MiP™ Arcade Battery Diagram/
Installation
