12. Usage
MiR250 Shelf Carrier User Guide (en) 03/2021 - v.1.4 ©Copyright 2021: Mobile Industrial Robots A/S.
199
•
Created a footprint named
Narrow doorway
that is 620 mm wide and 1300 mm long—
see
Creating a footprint on page 142
. The robot must be centered in the middle of the
footprint.
This mission only drives the robot through the doorway in one direction. If you
want the robot to go both ways, you need to make a new set of positions
facing the opposite direction and a new mission using these positions.
To create the mission, follow these steps:
1.
Go to
Setup > Missions
. Select
Create Mission
.