2. Safety
MiR500 User guide (en) 09/2019 - v.1.3 ©Copyright 2018-2020: Mobile Industrial Robots A/S.
11
WARNING
Lithium battery packs may get hot, explode or ignite and cause serious injury if
they are abused electrically or mechanically.
Observe the following precautions when handling and using lithium batteries:
•
Do not short-circuit, recharge or connect with false polarity.
•
Do not expose to temperature beyond the specified temperature range or
incinerate the battery.
•
Do not crush, puncture or disassemble the battery. The battery contains
safety and protection devices, which, if damaged, may cause the battery to
generate heat, explode or ignite.
•
Do not allow the battery to get wet.
•
In the event the battery leaks and the fluid gets into one’s eye, do not rub
the eye. Rinse well with water and immediately seek medical care. If left
untreated, the battery fluid could cause damage to the eye.
•
Use only the original charger (cable charger or charging station) and
always follow the instructions from the battery manufacturer.
•
Do not touch damaged batteries with bare hands. Only qualified personnel
should handle damaged batteries with suitable Personal Protection
Equipment (PPE) and tools.
•
Isolate the battery and keep clear if the following conditions are observed:
Battery exhibits abnormally high temperatures, emits abnormal odors,
changes colors, case is deformed, or otherwise differs from the normal
electrical or mechanical condition.
•
Modifications or manipulations in the battery may lead to considerable
safety risks and are therefore prohibited.
WARNING
MiR500 may drive into a ladder with a person on it. Risk of injury.
•
Don't place ladders in the robot's work environment.
