5. Getting started
MiR200 Hook Quick Start (en) 10/2020 - v.1.0 ©Copyright 2017-2020: Mobile Industrial Robots A/S.
32
1.
Locate the area below the side cover near the swivel wheel at the read end of the robot.
2.
Clean the area marked in the image below with a degreasing agent. If you cannot access
the area, either lift the robot to an appropriate height or remove the top cover to gain
access.
3.
Mount the nameplate on the cleaned area.
5.9 Enable MiR200 Hook feature
To access the MiR200 Hook settings and mission menus, the MiR200 Hook features must be
enabled. Follow these steps to check that they are enabled:
