3
Thank you for purchasing a quality Mira product. To enjoy the full potential of your new
product, please take time to read this guide thoroughly, having done so, keep it handy for
future reference.
The Mira CombiForce 415 is a pressure balanced shower control which maintains a
constant
outlet temperature
irrespective of changes in
inlet pressures
as long as the
inlet water temperatures
remain the same. It is not a thermostatic shower control and
does not sense supply temperature variations. Therefore, inlet water temperatures
especially the hot, should remain relatively constant.
The Mira CombiForce 415 can be installed with the following packages:
-
Fully modulating multipoint gas water heaters.
-
Fully modulating combination boilers.
-
Unvented mains pressure systems.
-
Mains pressurised, instantaneous hot water heated from thermal store, systems.
-
Pumped systems.
Showering temperature is adjusted by the shower control. The flow rate is determined by
the supply pressures available at the inlets, and the output rating of the heater appliance.
Shower controls covered by this guide:
Mira CombiForce 415
Surface mounted pressure balanced shower control for connection to
exposed pipework
,
for
high pressure
applications
(1.0 – 5.0 bar)
. Available in white/chrome, white/light
golden or all chrome finish.
Mira CombiForce 415B
Built-in shower control for connection to
concealed pipework
, for
high pressure
applications
(1.0 – 5.0 bar)
. Available in white, white/chrome, white/light golden or all
chrome finish.
1
Introduction
Section
If you experience any difficulty with the installation or operation of your new
shower control, then please refer to
Section 10
,
"Fault Diagnosis"
, before
contacting Kohler Mira Limited. Our telephone and fax numbers can be found on
the back cover of this guide.
Summary of Contents for Combiforce 415
Page 51: ...51 Appendix Notes ...