2
CONTENTS
Introduction 2
Guarantee 3
Recommended Usage
3
Patents and Design Registration
3
Safety : Warnings
3
Pack Contents
4
Exposed Thermostatic Mixer
4
Built-in Thermostatic Mixer
4
Specifications
5
Pressures 5
Temperatures 5
Thermostatic Shut-down
5
Connections 5
Flow Rates
5
Dimensions 6
Installation
7
Suitable Plumbing Systems
7
General 7
Exposed Thermostatic Mixer
8
Built-in Thermostatic Mixer
10
Solid Wall or Stud Partition
Fixing using Rear Mountings
10
Panel Fixing using Securing
Brackets 12
Solid Wall or Stud Partition
Fixing using Securing Brackets 13
RAC Assembly
15
Reversed Inlet Supplies
16
Operation 18
Commissioning 18
Maximum Temperature Setting
18
Type 2 Valves
19
Fault Diagnosis
20
Maintenance 21
Spare Parts
23
Exposed Thermostatic Mixer
23
Built-in Thermostatic Mixer
24
RAC Assembly
25
Accessories 26
Notes
27
Customer Service
Back Page
INTRODUCTION
Thank you for purchasing a quality Mira product. To
enjoy the full potential of your new product, please
take time to read this guide thoroughly, having
done so, keep it handy for future reference.
The Mira Element SLT thermostatic mixer is a
thermostatic shower control with a single lever
for on/off and temperature control. A Mid Flow
Overide feature allows up to 30% reduction in
flow at low pressures and a Temperature Overide
warns when moving into a hotter temperature
zone.
A 14 L/Min flow regulator is supplied for high
pressure systems to reduce excessive shower
force.
The thermostatic mixer incorporates a wax
capsule temperature sensing unit, which provides
an almost immediate response to changes in
pressures or temperature of the incoming water
supplies to maintain the selected temperature. An
adjustable maximum temperature stop is provided
which limits the temperature to a safe level.
Inlet filters are fitted to protect the thermostatic
cartridge.
Mira Element SLT Exposed:
Thermostatic
Mixer for connection to rising, falling or rear entry
pipework, supplied with L14A shower fittings.
Mira Element SLT Built-in:
Thermostatic Mixer
for connection to concealed pipework, supplied
with L14D BIV shower fittings or BIR showerhead
arm and deluge head.
These products have been certified as Type 2
valves under the BUILDCERT TMV2 scheme.
They also comply with the Water Supply (water
fittings) Regulations 1999.
If you experience any difficulty with the
installation or operation of your new
thermostatic mixer, please refer to
‘Fault
Diagnosis’
, before contacting Mira Showers.
Our contact details can be found on the back
cover of this guide.
Summary of Contents for Element SLT
Page 27: ...27 NOTES...
