22
4.
Carefully unclip and remove the concealing
plate from the backplate.
Note!
Use a screwdriver in the cutout to assist
separation.
5.
Unscrew the filter caps with the multi tool
(supplied) or a 12 mm hexagonal wrench and
remove the filters.
Note!
Use pliers to carefully remove the
filters.
6.
Clean each of the filters under a jet of water
to remove any lodged particles.
7.
Refit the filters and tighten the filter caps.
Note!
Make sure that the seal is fitted correctly
and not damaged.
8.
Turn on the hot and cold water supplies and
check for leaks.
9.
Reassemble in reverse order.
Filter
Filter Cap
Summary of Contents for Element SLT
Page 27: ...27 NOTES...
