8
1245548-W2-A
CFI270G
6
Carefully lift the curved panel back into place and
check that the glass is vertical and equally spaced
around the lip of the tray.
STEP
9
STEP
11
STEP
10
Drill 3 x 3mm holes through the jamb into the
wall channel.
STEP
8
Secure the jamb to wall channel with
3 x screw B.
B
Mark the fixing point for the lintel on the wall
at the height of the top of the glass.
Loosely fit the parts of the lintel together.
Note: the lintel end with a straight section
goes towards the wall.
984mm (1400 tray)
1240mm (1700 tray)
(adjust the dimension if other
than 10mm tile thickness)
Summary of Contents for Leap Walk In
Page 2: ...2 1245548 W2 A ...
Page 13: ...13 1245548 W2 A NOTES ...
Page 14: ...14 1245548 W2 A NOTES ...