www.mirabelleproducts.com
13
The air bath is controlled by a three button control.
1. The first button switches the blower on or off. The other features will not operate unless the blower is turned on.
2. The second button sets the power level of the blower. Holding the button depressed will cycle the blower power from low to high in a
continuous cycle. When the desired level is reached, remove your finger quickly from the button to maintain that power setting.
3. The third button is a three step wave action button. Once activated, the air holes expel air in a slow pulsating flow called wave action. There
are 3 levels for wave strength.
a.
Level 1
: operates the blower at a steady flow.
b.
Level 2
: quick wave action.
c.
Level 3
: slower wave action.
Air Bath Control Center Features
Air
POWER
SPEED
WAVE
Total Massage units are a combination of whirlpool and air massages. The left three buttons on the control panel. Operate the whirlpool
and the right three buttons operate the air system. The whirlpool and air massage systems may be used at the same time if desired. The
whirlpool and air bath operations are explained in section above.
Total Massage Control Center Features
Total Massage
AIR
JET
SPEED
SPEED
WAVE
WAVE
In-Line heater operation
If your unit has an in-line heater installed, operation is automatic only during the use of the whirlpool function. The in-line heater will maintain
the water temperature only while the whirlpool is in operation.
Operating Instructions for Provincetown and Bradenton
Whirlpool baths:
Equipped with on/off air switch actuator. Each depression of the switch will activate the pump. If off, one depression will turn
the pump on. if on, the next depression will turn it off.
Air baths:
Equipped with a three-speed air switch actuator. Each depression of the switch will change the flow of air. The forth depression will
turn off the air pump.
Total massage baths:
Equipped with both an on/off air switch actuator for whirlpool function and three-speed air switch actuator for air
function. See above for operation details.
