Regulatory Information
Regulatory Information
51
50
TINNITUS TECHNICAL DATA
Custom Tinnitus
™
Technology Maximum Output = 87 dB SPL (typical) when measured
in a 2cc coupler per ANSI S3.22 or IEC 60118-7.
WIRELESS TECHNICAL DESCRIPTION
Your hearing aids contain a radio transceiver utilizing Bluetooth Low Energy wireless
technology operating in the 2.4-2.4835 GHz frequency band with a maximum effective
radiated power of -13 dBm for the Power Plus BTE 13 using GFSK transmission
modulation. The receiver section of the radio has a bandwidth of 1.5 MHz.
This hearing aid model has been tested to, and has passed, the following emissions
and immunity tests:
• IEC 60601-1-2 radiated emissions requirements for a Group 1 Class B device as
stated in CISPR 11.
• RF radiated immunity at a field level of 10 V/m between 80 MHz and 2.7 GHz as well
as higher field levels from communications devices as stated in Table 9 of
IEC 60601-1-2.
• Immunity to power frequency magnetic fields at a field level of 30 A/m and proximity
magnetic fields as stated in Table 11 of IEC 60601-1-2.
• Immunity to ESD levels of +/- 8 kV conducted discharge and +/- 15 kV air discharge.
REGULATORY NOTICES
POWER PLUS BTE 13
FCC ID: EOA-24LIVIOPB13
IC: 6903A-24LIVIOPB13
FCC Notice
This device complies with part 15 of the FCC rules and with ISED Canada’s license-
exempt RSS standard(s). Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation of
the device.
Note: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.
