Operation
Operation
15
14
Power On & Off
To turn ON:
Insert a battery and completely close the battery door. Your
hearing aid has a power-on delay that may require a few
seconds. You may hear a tone indicating that your hearing aid
is powered on.
To turn OFF:
Open the battery door until the battery is no longer touching the
battery contacts.
Auto On/Off
Your hearing aid may support the ability to automatically go
into a low-powered state to conserve battery. This control can
be configured by your Miracle-Ear
®
Hearing Care Professional.
Place your hearing aid on a flat, stable surface (e.g., a table) with
your earmold or earbud facing upwards and it will go into a low-
powered state after about 15 minutes. To resume normal hearing
aid function, pick up your hearing aid and place it in your ear. Your
hearing aid will detect this motion and switch back on again. You
may hear a tone indicating that your hearing aid is powered on.
User Controls
Your hearing aid’s user control may have been customized
by your Miracle-Ear
®
Hearing Care Professional. Ask your
Miracle-Ear Hearing Care Professional how the user control
on your hearing aid is set.
Available User Control Functionality
The user control on your hearing aid can respond differently
depending on how long you activate (press) the button. Your
hearing aid is capable of having one function assigned to a short
press (press and release) and one function assigned to a long
press (press and hold).
The options selected on the next page indicate how your user
controls are configured.
Tap Gesture
Your hearing aid may support an additional user control.
This control can be configured by your Miracle-Ear
Hearing Care Professional. Once configured, while the
hearing aid is in your ear simply double tap directly
on the top of your ear with one or two fingers.
